BūvkalkulatoriFree construction calculators · MeistarPro
Guide (LV)
All calculators

EPS facade insulation calculator

Expert mode — consumption rates

📋 Materials

Net area: 0
Materials (excl. VAT)0 €
VAT 21%0 €
Total incl. VAT0 €

Prices are indicative LV retail averages (kursi.lv / Depo / Kruza / prof.lv). Enter your own — they're saved.

⚠️ Approximate estimate, based on average industry rates. Verify against the manufacturer datasheet.

EPS facade insulation

EPS (polystyrene) ETICS is the most economical and common facade insulation system. Typical thickness is 100–150 mm with about 6 dowels/m². It is light and easy to cut, but combustible — fire barriers around openings are required.

The calculator is pre-set for an EPS 100 system — enter the area to get a full material list with packaging and costs.

Worked example — 10 × 8 m house

For a single-storey 10 × 8 m house with 3 m walls, the gross facade area is (10+8)×2×3 = 108 m². Subtracting ~12 m² of windows and doors leaves 96 m² to insulate. With an EPS 100 system that means roughly: 96 m² of boards (with a 5% reserve ~101 m²), ~530 kg of adhesive (5.5 kg/m²), ~580 dowels (6 pcs/m²), ~106 m² of glass-fibre mesh (10 cm overlaps), ~430 kg of base coat and ~290 kg of decorative render at 1.5 mm grain.

In Latvia a full ETICS material kit costs around €25–35/m² (EPS) or €35–50/m² (mineral wool), with labour adding €25–40/m². Base rails, corner beads with mesh and window reveals are counted separately in linear metres — the calculator includes them once you enter the openings.

  • Dowel length = insulation thickness + 60 mm into masonry (e.g. 150 mm wool → 210–220 mm dowel).
  • No rendering below +8 °C or above +30 °C — in Latvia the safe season is May–September.
  • Diagonal 300 × 200 mm mesh strips at window corners are mandatory crack protection.

Frequently asked questions

How much does facade insulation cost in Latvia in 2026?

Roughly €50–75/m² with EPS and €60–90/m² with mineral wool (materials + labour, excluding scaffolding). The exact price depends on facade complexity, the number of openings and the render type.

What insulation thickness should I choose?

In the Latvian climate renovations typically use 100–150 mm; new builds aiming for modern energy standards use 150–200 mm. Below 100 mm the investment rarely pays off.

EPS or mineral wool — which one?

EPS is cheaper and easier to install but combustible. Mineral wool is non-combustible (A1), vapour-open and mandatory for fire barriers and timber buildings. Public and multi-storey buildings normally use wool.

Do I need a building permit for facade insulation?

For a private house a simplified notification to the local building authority (facade certification card) is usually enough when the exterior changes. Apartment buildings need a full design. Check with your municipality.

MeistarPro products

📊
MeistarPro — construction CRMProjects, estimates, workers, GPS time tracking and invoices in one place.
🌐
SiteAI — website builderAI builds a website for your business in minutes. With a domain.

My estimate

Total0 €
Professional PDF estimate with labour →